Acer Aspire Z1620 - LCD Failure

99
Mainboard Installation
NOTE:
Make sure all cables are clear when installing mainboard.
1. Align and install mainboard (F) with guidepins (G) on main frame. (Figure 3-48)
2. Install and secure screws (E) to mainboard.
3. Connect the following cables:
 Speaker cable (A) to mainboard connector (a).
 IR cable (B) to mainboard connector (b).
 Power switch cable (C) to mainboard connector (c)
 LVDS cable (D) to mainboard connector (d1)
 LVDS cable (D) to mainboard connector (d2)
4. Install CPU, RTC Battery, WLAN Module and DIMM.
ID Size Quantity Screw Type
E M3.0x5.0 5
Figure 3-49. Mainboard Recycling
+ IMPORTANT:
Follow local regulations for circuit board disposal.