90
Camera Module Installation
1. Connect camera module cable (D) to module connector (K). (Figure 3-39)
2. Install camera module (J) to camera hinge. (Figure 3-38)
3. Install and secure screw (A) to camera hinge.
4. Install camera module (H) to camera holder (I). (Figure 3-37)
5. Install camera module (G) to front cover (B). (Figure 3-36)
6. Install and secure screws (A) to camera module and front cover.
7. Connect camera cable (D) to mainboard connector (F)
8. Secure camera cable (D) to guide (E) on EMI side.
9. Secure camera cable (D) to guide (C) on EMI side.
10. Install WLAN module.
ID Size Quantity Screw Type
A M2.0x4.0 4
z
To Next Page
Loading...
