Acer Aspire Z1620 - HDD Module Removal

78
HDD Module Removal
Prerequisite:
VESA Bracket Removal
EMI Top Bracket Removal
1. Locate HDD module (A) and AC-IN bracket (M) on main frame (L). (Figure 3-27)
Figure 3-27. Locate HDD module and AC-IN bracket.
2. Disconnect the following cables:
 HDD and ODD power cable (G) from mainboard connector (D).
 HDD cable (E) from mainboard connector (B).
 ODD cable (F) from mainboard connector (C).
 Power cable (G), HDD cable (E) and ODD cable (F) from guide (H).
 HDD cable (E) from guide (I).
3. Remove screws (J) from ODD connector (K) on main frame.
4. Remove ODD connector (K).
5. Remove screws (N) from HDD module(A) on main frame. (Figure 3-28)
6. Slide and remove HDD module (A).
Figure 3-28. Remove HDD module screws.
N
A
B
C
D
I
L
M
E
F
G
H
J
K