40 Chapter 2
Information Menu
NOTE: The system information is subject to different models.
Parameter Description
CPU Type Type of processor currently installed in the system.
CPU Speed Speed of the processor currently installed in the system.
IDE0 Model Name Model name of HDD installed on the primary IDE channel.
IDE0 Serial Number Serial number of HDD installed on the primary IDE channel.
IDE1 Model Name Model name of devices installed on the secondary IDE channel. The hard disk drive or
optical drive model name is automatically detected by the system.
IDE1 Serial Number Serial number of devices installed on the secondary IDE channel.
ATAPI Model Name Model name of the ATAPI CD/DVD-ROM drive installed in the system.
System BIOS Version Version number of the BIOS setup utility.
VGA BIOS Version Version number of the VGA firmware.
KBC Version Version number of the keyboard controller.
Serial Number Serial number of the system.
Asset Tag Number Asset tag number of the system.
Product Name Product name of the system.
Manufacturer Name Name of the manufacturer of this system.
UUID Visible only when an internal LAN device is present.
UUID=32bytes
Phoenix TrustedCore(tm) Setup Utility
Main
CPU Type:
CPU Speed:
IDE0 Model Name:
IDE0 Serial Number:
IDE1 Model Name:
IDE1 Serial Number:
ATAPI Model Name:
System BIOS Version:
VGA BIOS Version:
KBC Version:
Serial Number:
Asset Tag Number:
Product Name:
Manufacturer Name:
UUID:
Intel (R) Core (TM)2 Duo CPU T7300 @ 2.00GHz
2000 MHz
XXXXXXXXXXX-(XX)
XXXXXXXX
None
None
XXXXXXXXXXX-XXX XX-XXXX-(XX)
VX.XX
XX-XXX XXXXXX.XXX.XXX.XXX.XXXXXX
XX.XX
XXXXXXXXXXXXXXXXXXXXXXX
None
TravelMate/Extensa 5XXX
Acer
XXXxXxXX-xXxX-XXxx-xXXx-xXXxXXxXxxXX
F1
Esc
Help
Exit
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
F9
F10
Setup Defaults
Save and Exit
Information Advanced Security Boot Exit
SG_TM4720_4320_Book.book Page 40 Friday, April 20, 2007 11:14 AM
To Next Page
Loading...
