Chapter 3 89
Removing the LCD Module Hinges
1. See “Removing the Battery Pack” on page 51.
2. See “Removing the SD Dummy Card” on page 51.
3. See “Removing the Express Dummy Card” on page 52.
4. See “Removing the Lower Cover” on page 53.
5. See “Removing the Fan Module” on page 60.
6. See “Removing the CPU Heatsink Module” on page 61.
7. See “Removing the CPU” on page 62.
8. See “Removing the Middle Cover” on page 63.
9. See “Removing the Keyboard” on page 64.
10. See “Removing the LCD Module” on page 67.
11. See “Removing the LCD Bezel” on page 83.
12. See “Removing the Inverter Board” on page 84.
13. See “Removing the LCD with Brackets” on page 85.
14. See “Removing the LCD Brackets” on page 87.
15. Remove the two screws (E) securing the left and right LCD module hinges.
16. Remove the left and right hinges from the LCD back cover.
Step Size (Quantity) Color Torque
1~2 M2.5 x L6 (2) Black 3 kgf-cm
SG_TM4720_4320_Book.book Page 89 Friday, April 20, 2007 11:14 AM
To Next Page
Loading...
