54 Chapter 3
5. Push out the latches on both sides of the DIMM socket to release the DIMM.
6. Remove the DIMM module.
7. Do the same on the other board.
Removing the WLAN Board Modules
1. See “Removing the Battery Pack” on page 51.
2. See “Removing the SD Dummy Card” on page 51.
3. See “Removing the Express Dummy Card” on page 52.
4. See “Removing the Lower Cover” on page 53.
5. Remove the mylar tape from the mic cable.
SG_TM4720_4320_Book.book Page 54 Friday, April 20, 2007 11:14 AM
To Next Page
Loading...
