Chapter 3 57
7. Remove the two screws (D) on the HDD bracket.
8. Remove the bracket as shown.
Removing the Optical Drive Module
1. See “Removing the Battery Pack” on page 51.
2. See “Removing the SD Dummy Card” on page 51.
3. See “Removing the Express Dummy Card” on page 52.
4. See “Removing the Lower Cover” on page 53.
5. Turn the base unit over, then remove the screw (E) on the bottom side of the unit.
Step Size (Quantity) Color Torque
7 M3 x L4 (2) Silver 1.6 kgf-cm
Step Size (Quantity) Color Torque
1 M2 x L6 (1) Black 1.6 kgf-cm
SG_TM4720_4320_Book.book Page 57 Friday, April 20, 2007 11:14 AM
To Next Page
Loading...
