56 Chapter 3
5. Pull the HDD module out by pulling on the mylar attached to it, gently slide-out the HDD module from its
bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
6. Remove the HDD rubber enclosure by gently prying open the enclosure, starting on either side (3) and
proceeding down the bottom (4) and towards the top of the disk (5), then pull it up to detach from the HDD
module (6).
SG_TM4720_4320_Book.book Page 56 Friday, April 20, 2007 11:14 AM
To Next Page
Loading...
