Chapter 3 51
Removing the Battery Pack
1. Turn base unit over.
2. Slide the battery lock/unlock latch to the unlock position (1).
3. Slide and hold the battery release latch to the release position (2), then remove the battery from the main
unit (3).
Removing the SD Dummy Card
1. See “Removing the Battery Pack” on page 51.
2. Push against the card, as if you were pushing it further into the slot, letting the card spring out.
SG_TM4720_4320_Book.book Page 51 Friday, April 20, 2007 11:14 AM
To Next Page
Loading...
