72 Chapter 3
9. See “Removing the Keyboard” on page 64.
10. See “Removing the LCD Module” on page 67.
11. See “Separating the Upper Case from the Lower Case” on page 70.
12. Disconnect the touchpad cable from the touchpad board.
13. Disconnect the fingerprint cable from the fingerprint board.
14. Remove the four screws (C) on the touchpad bracket.
15. Detach the touchpad bracket from the upper case.
Step Size (Quantity) Color Torque
1~4 M2 x L3 (4) Silver 1.6 kgf-cm
SG_TM4720_4320_Book.book Page 72 Friday, April 20, 2007 11:14 AM
To Next Page
Loading...
