Acom 500S - 5.4. Menu USER PREFERENCES

User's Manual | ACOM 500S | 160-4 m Linear Power Amplifier
Page 46 of 66 | S e c t i o n MENUS - SETTINGS AND OPTIONS
March 2023
5.4. Menu USER PREFERENCES
Figure 5-5 | Menu USER PREFERENCES
Figure 5-5 | Menu USER PREFERENCES
a) ANTENNA TUNER/SWITCH INSTALLED
If ACOM 04AT or 06AT antenna tuner is connected to RF OUTPUT 1, select YES. See Section 4.4 Operation with
an External Antenna Tuner and Refer to ACOM 04AT or 06AT User's Manual (available for download at
www.acom-bg.com).
b) AUTOMATIC MENU EXIT
When AUTOMATIC MENU EXIT is turned on, the amplifier exits the currently selected menu if no button has
been pressed for more than 5 minutes.
If AUTOMATIC MENU EXIT is turned off, the amplifier remains in the currently selected menu until the EXIT
button is pushed.
c) AUTO OPERATE
The AUTO OPERATE user setting is described in Sections 3.3 Initial Turning On and 4.1.c) AUTO OPERATE user
setting.
d) CALL SIGN
If entered here, a call sign (or another text) will be included in any Fault Log file generated by the amplifier
(see Section 5.5 Menu FAULTS LOG). The call sign (or another text) will not replace ACOM 500S logo on the
startup screen.