8. SPECIFICATIONS
8.1. Parameters
a) Standard Frequency Coverage*
1.800 - 2.000 MHz (160 m band)
3.500 - 4.000 MHz (80 m band)
5.020 - 5.455 MHz (60 m band)**
7.000 - 7.300 MHz (40 m band)
10.100 - 10.150 MHz (30 m band)
14.000 - 14.350 MHz (20 m band)
18.068 - 18.168 MHz (17 m band)
21.000 - 21.450 MHz (15 m band)
24.890 - 24.990 MHz (12 m band)
28.000 - 29.700 MHz (10 m band)
50.000 - 54.000 MHz (6 m band)**
70.000 - 70.500 MHz (4 m band)**
* Extensions or changes of the frequency coverage are possible on request.
** Please, refer the applicable regional band plans and laws for specific allocations and
limitations.
b) Rated Output Power
• 500 W ±0.5 dB, PEP or digital;
c) Intermodulation Distortions (IMD3)
• Better than 30 dB below the rated PEP;
d) Harmonic and Parasitic Emissions Output Suppression
• Below 30 MHz - better than 50 dBc below rated output;
• Above 30 MHz - better than 70 dBc below rated output;
e) Input Impedances
• Nominal value: 50 Ohm unbalanced, UHF (SO-239A) type connectors;
• SWR: Below 1.5 (1.2 typically), 1.8-70.5 MHz continuous range;
• RF bypass: SWR - below 1.1, 1.8-70.5 MHz;
To Next Page
Loading...
