Acom 500S - 5.6. Menu RESTORE DEFAULT SETTINGS

User's Manual | ACOM 500S | 160-4 m Linear Power Amplifier
Page 48 of 66 | S e c t i o n MENUS - SETTINGS AND OPTIONS
March 2023
5.6. Menu RESTORE DEFAULT SETTINGS
Four different factory-reset levels are available (see Figure 5-7 | Menu RESTORE DEFAULT SETTINGS).
In order to confirm the selected action, the operator must push the ACTION (down arrow) button once
more (as YES confirmation). After restoring the default settings, the control will return to the MENU
SELECTION screen (see Figure 5-1 | MENU SELECTION). If the ACTION (up arrow) button is pressed, the NO
is selected again, and the control will not leave the current position. At pressing the EXIT button in this
position, the control leaves this menu without changing anything and returns in the previous window (the
MENU SELECTION screen).
Figure 5-7 | Menu RESTORE DEFAULT SETTINGS
Figure 5-7 | Menu RESTORE DEFAULT SETTINGS