18
Click to add this entry into the Current Access Control List.
The Current Access Control List lists the client MAC addresses. Any wireless client with its MAC
address listed in this access control list will be able to connect to the device. You can select the
entries at the Select column and apply to the following function buttons.
Function buttons for the Current Access Control List:
Delete Selected
Delete the selected entries from the list.
Delete All
Flush the list.
4.2.5 WDS
Wireless Distribution System (WDS) is a system that interconnects BSS to build a premise
wide network. The DSL device supports the WDS protocol, which allows a point to point
link to be established between two APs. Only if you select AP+WDS mode on the Basic
Settings page, this WDS page can be configured.
Fields in this page:
Field Description
To Next Page
Loading...
Need help?
General