30
Function buttons in this page:
Apply Changes
Set new DNS relay configuration. New parameters will take effect after save into flash
memory and reboot the system. See section “Admin” for save details.
Undo
Discard your changes.
4.4.4.2 Dynamic DNS
Each time your device connects to the Internet, your ISP assigns a different IP address to
your device. In order for you or other users to access your device from the WAN-side, you
need to manually track the IP that is currently used. The Dynamic DNS feature allow you to
register your device with a DNS server and access your device each time using the same
Field Description
Attain DNS
Automatically
Select this item if you want to use the DNS servers obtained by the WAN
interface via the auto-configuration mechanism.
Set DNS Manually Select this item to configure up to three DNS IP addresses.
To Next Page
Loading...
Need help?
General