29
network. In this case, you can configure this device to act as a DHCP relay agent. When a
host on your network requests Internet access, the device contacts your ISP to obtain the
IP configuration, and then forward that information to the host. You should set the DHCP
mode after you configure the DHCP relay.
Fields in this page:
Function button in this page
Apply Changes
Click to save the setting to the configuration.
4.4.4 DNS Configuration
There are two submenus for the DNS Configuration: [DNS Server] and [Dynamic DNS]
4.4.4.1 DNS Server
This page is used to select the way to obtain the IP addresses of the DNS servers.
Field Description
DHCP Server Address Specify the IP address of your ISP’s DHCP server. Requests for IP information from
your LAN will be passed to the default gateway, which should route the request
appropriately.
To Next Page
Loading...
Need help?
General