ACP OMNIVERSA - Clinician Hand Control Usage; Operation and Protocol Selection; Channel Selection

OMNIVERSA
®
ULTRASOUND / ELECTROTHERAPY SYSTEM - 43 -
COPYRIGHT © 2017-2020, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
Clinician Hand Control Operation
The Clinician Hand Control can only be used when navigating in two
of the Electrotherapy section Indications.
The two indications are
 Functional Re-Education – Upper Extremity
 Functional Re-Education – Lower Extremity
Clinician Hand Control – Functional Re-Education
Upper Extremity Protocols Submenu
There are three protocols to select from
 LVPC Small Muscle – Asymmetrical Biphasic – Hand
Control
 LVPC Medium Muscle – Asymmetrical Biphasic – Hand
Control
 MFAC Hand Control
Select the desired protocol from the options to proceed to the channel
selection menu.
Note:
Use of the hand control protocols do not require the Clinician Hand
Control but can be performed using touch screen as well. The
following example of use can be applied to all of the Hand Control
Protocols.
Channel Selection
After The Clinical Hand Control selection is made select the channel
for use. When Ch. A is selected; Ch. B is still available for another
therapy.
When Ch. A+B is selected both channels have the same parameters
and only the intensity can be set differently.