4-4
4.1 Overview SPM-32A ... SPM-36A
To enter a new frequency or to alter the
frequency press [STEP] then:
• Enter the frequency using the
number keys (entry taken as kHz),
terminate with [ENTER].
• The frequency can be incremented
or decremented by means of the 4
up / down keys, the stepwidth is ∆F.
∆F can be set to any integer
frequency value between 0 Hz and
620 kHz
1
, 2 MHz
2
or 3.5 MHz
3
.
By entering this key sequence (∆F) you
can alter the stepwidth:
• Enter ∆F (kHz) using the number
keys and terminate with [ENTER]
• The up / down keys can also be
used to alter ∆F.
1 SPM-32A
2 SPM-33A/-34A/-35A
3 SPM-36A
STEP
STEP
*
∆
F
To Next Page
Loading...
