4-60
4.2 Operation and features SPM-32A ... SPM-36A
4.2.7 Storing setups (MEMORY)
The instrument can store up to 100 complete setups which
can be recalled when required. The current result is also
stored when the setup is stored. As it is possible to display
stored setups without using them for measurements, the
memory can also be used as an electronic notebook.
RCL MEM Recalls stored setup
STO MEM Stores current setup and latest result
DISPLAY MEM Displays a setup stored in memory
MEM OFF Cancels the current memory function
4.2.7.1 Addresses
Addresses 0 to 99 are used to store setups. One setup can
be stored at each address.
When STO MEM, RCL MEM or DISPLAY MEM are selected,
an address number is displayed in the lower right-hand
corner of the display. The arrow to the right of the displayed
address means that the address number can be altered.
• Enter the address number (e.g. 57) using the number
keys
RCL MEM STO MEM DISPLAY MEM MEM OFF
5 7 ENTER
To Next Page
Loading...
