4-28
4.2 Operation and features SPM-32A ... SPM-36A
Changing the frequency using the up / down keys
SPM-32A/-33A/-34A/-36A:
• The repeat function comes into effect if you hold down
any of the up / down keys. The step width for keys
marked with one arrow is increased to 10 Hz when a
bandwidth
>25 (100) Hz is selected.
• When TUNE mode has been selected, the up / down
keys are a good way of fine tuning the instrument.
SPM-35A:
Table 4-4 Changing the frequency in steps
Bandwidth/Hz Step width/Hz
512
25, 100, 200, 400 1 10
3.1 kHz 1 200
Frequency is incremented by 10, 100 or 200 Hz
Frequency is increased by 1 Hz
Frequency is decreased by 1 Hz
Frequency is decreased by 10, 100 or 200 Hz
(depends on bandwidth)
(depends on bandwidth)
To Next Page
Loading...
