SPM-32A ... SPM-36A 4.2 Operation and features
4-49
Voltage measurement
Absolute measurements can be displayed in terms of power
level or voltage.
Display range
Switching from power level to voltage display
This is done by pressing
Fig. 4-18 Display of input voltage
The input voltage display is 4 digit. The instrument automat-
ically selects the correct display units (µV, mV, V) for the
measurement (e.g. 732.1 µV AC or 24.36 mV AC or 1.256
µV AC).
Only absolute measurements can be made in this mode,
which is automatically selected regardless of the previous
measurement mode used. It is not possible to enter a refer-
ence voltage level.
Selective measurement 1 µV to 3.8 V
Wideband Measurement 1 mV to 3.8 V
*
.
VOLT
74
150
To Next Page
Loading...
