4-52
4.2 Operation and features SPM-32A ... SPM-36A
Entering the reference level as a constant
You can change the reference level after you have entered
the following key sequence:
The current value of the reference level is shown in row D of
the display.
You can now enter a new reference level, e.g. -26 dB:
Changing the reference level in steps:
*
REF
ABS
-
2 6 ENTER
The reference level is increased by 1 dB
The reference level is increased by 0.1 dB
The reference level is reduced by 0.1 dB
The reference level is reduced by 1 dB
To Next Page
Loading...
