SPM-32A ... SPM-36A 4.2 Operation and features
4-63
Storing results
When a setup is stored, the current result is also stored.
These results can be viewed later using the DISPLAY MEM
function. In effect, the instrument can be used as an
electronic notebook, which tells you the settings you have
used as well as the results.
Example showing storage of three results. The initial
address is 25. The setup selected is always the same. The
initial address is entered using the number keys. The
address number can then be incremented using the [↑] key.
1st result:
2nd result:
3rd result:
Quit memory mode by entering:
*
2 5 ENTER
STO MEM
ENTER (address 26)
ENTER (address 27)
*
MEM OFF
To Next Page
Loading...
