ACTi E48 - Page 11

www.acti.com
Hardware Manual
11
Item
Description
NOTE 1: The microphone must have a built-in amplifier.
Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.
NOTE 2: If the audio connectors will not be used, leave the
rubber caps on to ensure cables remain waterproof and eliminate
short-circuit hazards.
8
Audio Output
Connects to audio output devices, such as a speaker, etc.
NOTE: If the audio connectors will not be used, leave the rubber
caps on to ensure cables remain waterproof and eliminate
short-circuit hazards