22
Wireless DSL Gateway User Manual
128-bit WEP - 128-bit WEP requires one or more keys, each key comprising hexa-
DECIMALPAIRS!HEXADECIMALDIGITCONSISTSOFANALPHANUMERICCHARACTERRANGING
from 0-9 or !&!NEXAMPLEOFA128-bit WEP key is: D-44&%6#!1%&2E-
D
#4-21-74-5D-B1. To create a 128-bit WEP key, activate Key 1 by clicking in the
appropriate circle, select “128BITvFROMTHEDROPDOWNLISTONTHERIGHTTHENENTER
hexadecimal digit pairs in the KeyTEXTBOX!FTERACTIVATING128-bit WEP, a com-
puter with wireless capability can join the network only if this key is entered in the
computer’s wireless encryption scheme.
256-bit WEP - 256-bit WEP requires one or more keys, each key comprising 29 hexa-
DECIMALPAIRS!HEXADECIMALDIGITCONSISTSOFANALPHANUMERICCHARACTERRANG-
ing from 0-9 or !&. To create a 256-bit WEP key, activate Key 1 by clicking in the
appropriate circle, select “256BITvFROMTHEDROPDOWNLISTONTHERIGHTTHENENTER
29 hexadecimal digit pairs in the KeyTEXTBOX!FTERACTIVATING256-bit WEP, a com-
puter with wireless capability can join the network only if this key is entered in the
computer’s wireless encryption scheme.
!
Note: Not all wireless 0##ARDSSUPPORT128- or 256-bit WEP.
Ensure all 0##ARDSINSTALLEDINTHENETWORKEDCOMPUTERSSUP-
port 128- or 256-bit WEP before activating.
When finished with this screen, click Apply to save all changes. To return to the
7IRELESS!DVANCED3ETTINGSSCREENCLICKBack.
WEP+802.1x
!CTIVATINGWEP+802.1xINTHE7IRELESS!DVANCED3ETTINGSSCREENGENERATESTHE
“WEP+802.1xvSCREEN4HISSETTINGISFORENTERPRISENETWORKSONLYANDSHOULDBE
accessed by an experienced information systems specialist.
To set up WEP+802.1x security, enter the IP address of the 2!$)53server in the
“Server IP !DDRESSvTEXTBOXANDTHEh3ECRETvKEYFORCOMMUNICATIONBETWEEN
the 2!$)53SERVERANDTHE'ATEWAYINTHEh3ECRETvTEXTBOX4HEh0ORTvAND
h'ROUP+EY)NTERVALvVALUESSHOULDREMAINTHESAME
To Next Page
Loading...
