Actron CP9190 - Modules Present

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 37
Global OBD II Diagnostics
4
Modules Present
The Scan Tool identifies the module IDs and communication type
for OBD II modules in the vehicle.
From the Special Tests Menu:
1. Select Modules Present.
•Use UP or DOWN arrow
key until Modules Present is
highlighted.
•Press
ENTER .
✓ The types of protocols (communication types) supported by the Scan
Tool are:
❒ ISO 9141-2 protocol is shown as ISO.

Drive Cycle Monitor ?
State OBD Check
O2 Monitor Test
Diag Mon Tests
On-Board Systems
Vehicle Info
Special Tests Menu
Modules Present

ID Protocols
$10 ISO*
$1A ISO*
Modules Present