Actron CP9190 - Beeper

Using The Scan Tool
3 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
2.Increase or Decrease
Display Contrast.
•Use
UP a rrow key to
increase Contrast.
•Use
DOWN arrow key to
decrease Contrast.
3.Save Contrast Setting
and return to the System
Setup menu.
•Press
ENTER .
Beeper
✓ Beeper selection allows the user to turn off the Scan Tool’s beeper.
The bell symbol
 will not appear in the lower right hand corner of
the display when the beeper is off.
From System Setup menu:
Press ENTER
when done.
50%
 Darken
 Lighten
Adjust Contrast