Actron CP9190 - Changing Display Contrast

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 9
Using The Scan Tool
3
2.Select Desired
Measurement Unit.
•Use
UP or DOWN arrow
key until desired unit is
highlighted.
3.Save Measurement Setting.
•Press
ENTER .
✓ Press ENTER again to return to the
System Setup menu.
Changing Display Contrast
From System Setup screen:
1.Select Contrast Adjust.
•Use
UP or DOWN arrow
key until Display Contrast is
highlighted.
•Press
ENTER .
English/Metric
Metric
Measurement Units
English (Default)

English/Metric
Display Contrast
Be eper
Auto Power Off 
Tool Information
Display Test
Keyboard Test
System Setup
Contrast Adjust
