Actron CP9190 - Changing Auto-Power off

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 11
Using The Scan Tool
3
1.Select Beeper.
• Use
UP or DOWN
arrow key until Beeper is
highlighted.
• Press
ENTER .
2.Select desired Beeper sound
choice.
• Use
UP or DOWN
arrow key until desired choice
is highlighted.
3.Save Beeper sound setting.
• Press
ENTER .
✓ Press ENTER again to return to the System Setup menu.
Changing Auto-Power Off
The Auto-Power Off feature allows the tool to turn off automatically after
a selected amount of time when tool is not being used.
From System Setup menu:
1.Select Auto Power Off.
•Use
UP or DOWN arrow
key until Auto Power Off is
highlighted.
•Press
ENTER .
English/Metric ?
Contrast Adjust
Be eper 
Auto Power Off 
Tool Information
Display Test 
Keyboard Test
System Setup
Be eper

English/Me
Off
Be eper Sound
On (Default)

English/Metric
Contrast Adjust
Be eper
Auto Power Off
Tool Information
Display Test
Keyboard Test
System Setup
Auto Power Off

