EasyManuals Logo

Ada Delta-88 User Manual

Default Icon
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
109
Appendix B
ADA Bus Address & Release Numbers
Software Version Release Information:
The DELTA-88, SSD-66 (THX), MT-3000, PCT-8, and MC-3000 each operate on their own microproces-
sor. It is import that the corresponding software versions are in place for all these components to
operate properly with each other. Since the Delta System is software based, out-of-date versions may
not access functions on the various units. The following list details the current compatible versions (or
greater) at the time of this manual's printing.
Delta-88 Version 1.0
SSD-66 (THX) Version 5.2
MT-3000 Version 1.51
PCT-8 Version 1.01
MC-3000 Version 2.02
Determining Which Software Version Is Installed:
Each of the previous components permits you to access the software release number. Follow the
appropriate steps to regain the software release number respective to each component.
DELTA-88
While all rooms are off, press the LABEL Button. The Release Number will appear source display.
SSD-66 (THX)
Plug the SSD-66 into an AC outlet. If the SSD-66 is currently set up with an AC switcher and VS-3, it
may be necessary to first turn on the VS-3. Press the MODE Button to turn the unit on. Keep pressing
the MODE Button until the words SET UP MODE appear in the display window. Press the RIGHT
Button on the upper right of the SSD-66 and the Release Number will appear on the twelve character
alphanumeric display.
MT-3000
Turn the MT-3000 on and press the LABEL Button until its LED is flashing. Press the DISPLAY Button
and the MT-3000's Release Number will appear in one of the three alphanumeric LED displays.
PCT-8
Continuously press the MENU button until the display window reads the release number
MC-3000
There are two ways to display the MC-3000's Release Number. The release number will appear on the
keypad when it is first connected to an active ADA Bus™. If the keypad is already on, the release
number can be obtained by pressing and holding the SHIFT button until it appears in the keypad's
display window.
NOTE: As part of an ongoing process to improve our products, Audio Design Associates
reserves the right to change either the documentation for this unit, or the unit itself,
without notice.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ada Delta-88 and is the answer not in the manual?

Ada Delta-88 Specifications

General IconGeneral
BrandAda
ModelDelta-88
CategoryStereo System
LanguageEnglish

Related product manuals