9
| P a g e © Adam Equipment Company 2010
3. INSTALLATION
3.1. UNPACKING
The GBK/GFK scales have already been adjusted to work with a platform and have
been configured for this application. The platform and indicator have been
calibrated as a pair and must be used together .
3.2. LOCATING
• The scales should not be placed in a location that will
reduce the accuracy.
• Avoid extremes of temperature. Do not place in direct
sunlight or near air conditioning vents.
• Avoid unsuitable tables. The table or floor must be rigid
and not vibrate.
• Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or large
motors.
• Do not place near vibrating machinery.
• Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or
immerse the scales in water.
• Avoid air movement such as from fans or opening doors.
Do not place near open windows or air-conditioning
vents.
•
Keep the scales clean. Do not stack material on the
scales when they are not in use.
To Next Page
Loading...
Need help?
General
