32
| P a g e © Adam Equipment Company 2010
• When the scale is at zero place a second weight on the platform. When
stable press [Print] to accumulate the weight. The display will show
"ACC 2" for 2 seconds and then show the new total.
• .
• Continue until all weights have been added. This can continue for up to
99 entries until the capacity of display is exceeded.
• To view the total in memory press the [Print] key when the scale is at
zero. The display will show the total number of accumulation "ACC xx"
and the total weight before returning to zero.
• To print the total, press [Print] to recall and then immediately press
[Print] the second time to print the results.
• To erase the memory, press [Print] to view the total and then
immediately press [CE] to clear the memory.
To Next Page
Loading...
Need help?
General
