17
Chatper 2 - Connections
www.adcom.com
GFR-700HD Owner’s Manual
Component/Progressive Scan Connections
The GFR-700HD features four Component video in-
puts for connection to DVD players, digital CableTV
boxes, digital satellite receivers, HDTV receivers/
tuners, and more. Component video is the best qual-
ity analog connection method to an HDTV display.
Special Note on Progressive Scan DVD Players
If you want to use the GFR-700HD’s built-in video
scaling capability, you MUST set the output of your
Progressive Scan DVD player to standard 480i resolu
-
tion. Extended Definition (480p) and High Definition
analog sources connected to the component video
inputs are “bypassed” (i.e., sent to the component
output) as is—NOT scaled.
Component/Progressive Scan Connections
1 Choose an available Component Video input
(1~4).
2 Connect Component video cables.
• Using a set of Component video cables, con
-
nect the Y/Pb/Pr outputs on your source de-
vice to the corresponding Y/Pb/Pr inputs on
the GFR-700HD.
• Be sure to match the red, green, and blue
connectors accordingly.
Notes:
• To select the Component/Pro-
gressive Scan inputs, press
the corresponding Video 1~4
button on the remote control
or front panel.
• To connect the Component/
Progressive Scan outputs to
your TV, see page 22.
Component Video/
Progressive Scan
Inputs
To Next Page
Loading...
