19
Chatper 2 - Connections
www.adcom.com
GFR-700HD Owner’s Manual
HDMI Connections
About HDMI
HDMI (High Definition Multimedia Interface) is an ad-
vanced audio/video connection method that transfers
full-bandwidth, uncompressed digital audio and video
signals over a single cable.
As a result, pure digital signals can pass unfettered
from your HDMI-compatible source components to
the GFR-700HD and out to your digital TV for superior
picture and sound quality.
About the HDMI Scaler
The GFR-700HD is more than just a switch for HDMI
source components. The GFR-700HD comes with a
built-in scaler, a powerful video signal processor that
allows you to scale the 480i or 576i NTSC/PAL inputs
of your source components and output the precise
resolution for your display device up to 1080p.
That means you can run your legacy video sources
through the GFR-700HD to your HDMI display device
through a single cable. The powerful, integrated pro
-
cessor deinterlaces and scales standard NTSC/PAL
signals to the native resolution of your display .
Connecting HDMI Components
1 Choose an available HDMI input.
2 Connect HDMI cable(s).
• Using an HDMI cable, connect the HDMI out-
put on your source device to one of the HDMI
inputs on the GFR-700HD.
3 Assign the HDMI input to an input source and con-
figure it.
• See pages 33-35.
4 Connect the HDMI output to your TV.
• See page 22.
Notes:
• The HDMI inputs are assignable
to any source; see page 33.
• To connect the HDMI output to
your TV, see page 22.
HDMI
Inputs
To Next Page
Loading...
