EasyManua.ls Logo

Adcom GFR-700HD - Tone Control

Adcom GFR-700HD
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
Chapter 4 - Operations
GFR-700HD Owner’s Manual
Other Surround Modes
7.1 m
2
Uses an Adcom-proprietary digital pro-
cessing technology to expand incoming
stereo signals to 7.1-channel surround
sound. Use if:
Your source component is connected to the ana-
log or digital audio inputs.
Your source audio is in 2-channel analog or digi-
tal PCM format.
You have seven speakers plus a subwoofer.
STEREO
Passes an incoming or downmixed stereo signal to
the front speakers. Use if:
Your source component is connected to an ana
-
log or digital audio input.
Your source audio is in 2-channel analog or digi-
tal PCM format.
You have at least two speakers (LF/RF), or would
simply prefer to listen to a multi-channel source
through your two front speakers.
HALL
Creates a hall or amphitheater effect from an incom
-
ing or downmixed stereo signal. Use if:
Your source component is connected to an ana-
log or digital audio input.
Your source audio is in 2-channel analog or digi-
tal PCM format.
You have at least two speakers (LF/RF), or would
simply prefer to listen to a multi-channel source
through your two front speakers.
5-STEREO
Generates maximum output for a ve speaker sys
-
tem. The rear speakers are driven with the same
signal as the front left and right, while the center
speaker is a monophonic summation of the front
speakers. Use if:
Your source component is connected to an ana-
log or digital audio input.
Your source audio is in 2-channel analog or digi-
tal PCM format.
You have at at least five speakers (LF/RF, C, LS/
RS).
Tone Control
Manual Bass/Treble Control
Follow these steps to make Bass/Treble adjustments
on the fly:
Press the Bypass button on the remote control to
toggle Tone Control on.
Use the Bass and Treble buttons to bring up the
tone adjustment on-screen display.
Use the / buttons to set the desired level.
Notes:
The tone adjustment on-screen display times out
after 3 seconds if no button is pressed.
Tone controls are not available in the Dolby
Digital EX, DTS-ES, NEO6, and Pro Logic IIx Surround
modes.

Table of Contents

Other manuals for Adcom GFR-700HD

Related product manuals