ADDER Infinity User Manual

32
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Transmitters > Congure New Transmitter
This page is displayed whenever a new transmitter is added to the network.
The IP Address 1 eld, showing 0.0.0.0, is for an uncongured device on its zero cong
address. Before A.I.M. can add the device into its database, a new IP address must be
added to IP Address 1. This is the system IP address and applies equally for ALIF (1000
series) and ALIF dual (2000 series).
ALIF dual units have a Teaming port which provides a second 1Gigabyte link port which
can be used for bandwidth doubling and/or redundancy. The IP address 2 eld is for the
Teaming port. In order to use the Teaming port, IP address 2 eld must be given a valid IP
address. For ALIF (1000) units, this eld will remain blank.

ADDER Infinity Specifications

General

Brand	ADDER
Model	Infinity
Category	Switch
Language	English