21
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Upgrading (or downgrading) A.I.M. rmware
In certain circumstances it may be necessary to upgrade or downgrade the rmware of
an A.I.M. unit to take advantage of particular features. The Upgrade AIM Software option
changes the rmware without affecting conguration data such as devices, channels,
presets, users, groups and logs.
Note: Although conguration details are not affected during the rmware upgrade process,
you are recommended to take a backup onto an external device before starting the upgrade
process.
Note: When changing the A.I.M. rmware, it will be necessary to reboot the unit in order to apply
the changes.
Note: There is no longer any support for ALIF1000 units within A.I.M. rmware version 4.1
onwards.
To upgrade/downgrade the A.I.M. unit rmware
1 Download the appropriate rmware le from the Adder website or technical support.
2 Visit the Dashboard > Updates page of the A.I.M. unit and within the ‘Upgrade AIM
Software’ section, click the Browse... button to locate the downloaded rmware le.
3 When you are ready to proceed, click the Upload button. The le will be uploaded,
checked and applied to the secondary partition within the A.I.M. unit. A conrmation
message will be displayed and you will also be prompted to reboot the A.I.M. unit.
4 When it is appropriate to do so (dependent on the current activity of the A.I.M. unit),
click OK and then click the Reboot Now button. The A.I.M. unit will reboot using the
new rmware partition.
To Next Page
Loading...
Need help?
General
