ADDER Infinity User Manual

22
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Dashboard > Event Log
This page lists events that have occurred within the A.I.M. system. A drop-down list box
is available at the top of the page that allows you to lter log page entries to show only
particular categories, as follows:
• All: Lists all events
• Admin: Lists automatic events and/or those performed by the admin user (including:
backup, scheduled backup, backup restored, updating A.I.M. settings, adding/removing/
updating channels/users/devices, Active Directory Sync, Firmware upgrades, A.I.M.
upgrades, etc).
• Users: Lists events performed by regular users (including: login, logout, channel
connections, disconnects, etc).
• Login: Lists login and logout events, whether performed via the admin console or
receiver devices.
• Channel Changes: Lists only channel changes (connections & disconnects).
• Device Status: Lists new devices that are added to the A.I.M. network, get restarted/
rebooted or go online/ofine
You can archive Event Log data to a CSV le via the “Archive log data” link, which jumps
to the relevant section within the Dashboard > Backups page.
Dashboard > Remote Support
The remote support feature grants a member of the technical support team remote
access to the A.I.M. unit. This page shows the current state of remote support, whether
currently enabled or disabled, plus a button to change the remote support state.
Note: Before enabling remote support contact Adder technical support.
Dashboard > Active Connections
Shows only connections that are currently active within the A.I.M. network. Please refer
to the Connection Log page section below.
Dashboard > Connection Log
Shows all connections that have occurred within the A.I.M. network. The most recent
connections are shown at the top, and the log is paginated (the number of rows per
page can be set from the Dashboard > Settings page). The log can be ltered to show
all connections, or only currently active connections. Current connections have no “end
time” and a disconnect icon ( ).
The “Audio Broadcast IP” and “Video Broadcast IP” columns show whether the audio
and video are being sent directly from the transmitter to the receiver or broadcast to
a multicast group. Direct links are denoted by the receiver’s IP address only; whereas
multicast broadcasts are indicated by the multicast icon ( ) and the common multicast
IP address (the address will be in the range specied within the “Multicast IP Address”
option of the Dashboard > Settings page).
Actions that you can take within this page include:
• Hover the mouse over the receiver, user or channel names to show more information
about each item.
• Hover the mouse over the ve “Info” icons to see descriptions (audio on/off; video on/
off; USB on/off; shared/exclusive mode; serial on/off).
• Click
to end a connection between a receiver and a channel.

ADDER Infinity Specifications

General

Brand	ADDER
Model	Infinity
Category	Switch
Language	English