ADJ SCENE SETTER 48 - Setup; Change Record Code

31
QUICK REFERENCE GUIDE
CATEGORY FUNCTION OPERATION METHOD
Setup
MIDI In Ch. Setup Hold “RECORD” and press “FLASH1, FLASH1, FLASH1”
MIDI Out Ch. Setup Hold “RECORD” and press “FLASH2, FLASH2, FLASH2”
MIDI Exclusive Input Hold “RECORD” and press “FLASH3, FLASH3, FLASH3”
MIDI Exclusive Output Hold “RECORD” and press “FLASH4, FLASH4, FLASH4”
Max Speed Setup, 5
minutes
Hold “RECORD” and press “FLASH5, FLASH5, FLASH5”
Max Speed Setup, 10
minutes
Hold “RECORD” and press “FLASH10, FLASH10, FLASH10”
Quit MIDI In Ch.
Setup
Hold “RECORD” and press “EXIT”
Quit MIDI Out Ch.
Setup
Hold “RECORD” and press “EXIT”
DMX Ch. Assignment
1. Hold “RECORD” and press “FLASH8, FLASH8, FLASH8”
2. Press “UP” or “DOWN” for DMX channel
DMX Ch. Reset Hold “RECORD” and press “FLASH7, FLASH7, FLASH7”
Change
Record Code
Change Record Code
1. Record enable: Hold “RECORD” button, then press “FLASH1,
FLASH6, FLASH6, FLASH8”
2. Hold “RECORD” and “EDIT” then enter a new 4-digit record code
using the Flash buttons
3. Enter the new record code a second time to conrm
4. To cancel the new code, hold “RECORD” and “EXIT”