ADJ SCENE SETTER 48 - Quick Reference Guide; Recording; Play Back

30
QUICK REFERENCE GUIDE
CATEGORY FUNCTION OPERATION METHOD
Recording
Record Enable Hold “RECORD” and key in record code on Prest A & B
Erase All Programs Hold “RECORD” and key in “1-4-2-3” on Preset A
Record Disable Hold “RECORD” and press “EXIT”
Clear Memory Hold “RECORD” and press “REC CLEAR”
Record Step Set Scene, then hold “RECORD”
Record Chase
Set Scene, then press “RECORD”. Repeat for each step in the
chase.
Assign to Fader Hold “RECORD” and press “SCENE”
Record Chase Speed
Set Speed Fader at “Show”, then hold “REC SPEED” and press
“SCENE”
Edit Channel Levels
Turn on Edit Mode, then hold “UP” or “DOWN” and press “CHAN-
NEL”
Add Step
1. Turn on Edit Mode
2. Record New Step
3. Select step by pressing “STEP” to scroll through the steps in
order until you reach the location where you want to insert the
new step
4. Press “INSERT”
Delete Step
1. Turn on Edit Mode
2. Press “STEP” to scroll through the steps in order until you nd
the step you wish to delete
3. Press “DELETE”
Quit Exit Hold “RECORD” and press “EXIT”
Factory Record Code Hold “RECORD” and then press “1-6-6-8”
Play Back
Preset Mode Press “MODE SELECT”
Double Preset Set Scene, Master A&B Up/Down
Single Preset Park Set Scene, press “PARK”, move Masters down
Flash Add/Kill Press “ADD/KILL” (Off = ADD, On = KILL)
Manual Scene Fade at Instant, Scene Up/Down
Fade Scene Set Fade time, Scene Up/Down
Select Chase Chase Fader up
Manual Chase Speed at Show, press “STEP” to chase through scenes
Fade Chase Select Chase, Set Speed, Fade
Audio Chase Press “AUDIO”: On = AUDIO, Off = CHASE
Blind Channel Hold “BLIND” and press “CHANNEL”
Home Channel Hold “HOME” and press “CHANNEL”
Hold Scene Press “HOLD”
Dead Blackout Press “DARK”
Display % or 0-255 Hold “RECORD” and press “% OR 0-255”
Call Pre-Set Program
Hold “RECORD” and press “FLASH-6, FLASH-6, FLASH-8,
FLASH-8”
CONTINUED ON NEXT PAGE