ADTRAN MX2800 M13 - Page 131

MX2800 M13 Multiplexer User Manual Transaction Language 1 (TL1), Section 9
61200290L1-1G 9-7
ENT-USER-SECU:<tid>:<username>:<ctag>::<password>,,<privileges>;
Description Adds the requested user to the User Account Management table
TID Target ID
AID Username
CTAG* Transaction Number (integer)
PARAM1 User’s password
PARAM3 User’s privileges:
•0 disabled
• 1 guest
• 2 interface
•4 test
•8 admin
DLT-USER-SECU:<tid>:<username>:<ctag>;
Description Removes the requested user from the User Account Management table
TID Target ID
AID Username
CTAG* Transaction Number (integer)
INH-MSG-{EQPT|rr|ALL}:<tid>::<ctag>:<ntfcncde>;
Description Inhibits the transmission of the requested autonomous alarm(s)
MOD2 Specifies what entity type to inhibit:
• EQPT General Equipment Unit
• rr Facility or Circuit (i.e. T1, T2, T3)
• ALL All entity types
TID Target ID
CTAG* Transaction Number (integer)
PARAM1* Specifies what notification code to inhibit:
• MN minor
•MJ major
• CR critical
• ALL all notification codes
RTRV-HDR:<tid>::<ctag>;
Description Replies with a normal “COMPLD” response
TID Target ID
CTAG* Transaction Number (integer)
Table 9-2. TL1 Commands (Continued)