ADTRAN MX2800 M13 - Table 9-2. TL1 Commands

9-6 61200290L1-1G
Section 9, Transaction Language 1 (TL1) MX2800 M13 Multiplexer User Manual
Table 9-2. TL1 Commands
ACT-USER:<tid>:<username>:<ctag>::<password>;
Description Initiates a TL1 session
TID Target ID
AID Username (must be present in the User Account Management table)
CTAG* Transaction Number (integer)
PARAM1 Password for associated username
ALW-MSG-{EQPT|rr|ALL}:<tid>::<ctag>;
Description Allows the transmission of the requested autonomous alarm(s)
MOD2 Specifies what entity type to allow:
• EQPT General Equipment Unit
• rr Facility or Circuit (i.e. T1, T2, T3)
• ALL All entity types
TID Target ID
CTAG* Transaction Number (integer)
PARAM1* Specifies what notification code to allow:
• MN minor
•MJ major
• CR critical
• ALL all notification codes
CANC-USER:<tid>::<ctag>;
Description Terminates a TL1 session
TID Target ID
AID* Username (must be present in the User Account Management table)
CTAG* Transaction Number (integer)
ED-USER-SECU:<tid>:<username>:<ctag>::,<password>,,<privileges>;
Description Edits the requested user’s account
TID Target ID
AID Username
CTAG* Transaction Number (integer)
PARAM2 User’s new password
PARAM4 User’s new privileges:
•0 disabled
• 1 guest
• 2 interface
•4 test
•8 admin