ADTRAN MX2800 M13 - Figure 2-9. Loopback Menu; Loopbacks; Telnet Client

MX2800 M13 Multiplexer User Manual Installation and Operation, Section 2
61200290L1-1G 2-13
Loopbacks
Performs loopback tests over the DS3, DS2s, or T1/E1 lines. See Figure 2-9 for an illustration of the
Loopback Menu. Refer to Section 6, Loopbacks for more detailed information.
Figure 2-9. Loopback Menu
Telnet Client
A Telnet session may be established with any device visible in the network from the MX2800. See Figure
2-10 on page 2-14 for an illustration of the Telnet Client menu.