ADTRAN MX2800 M13 - Table 9-9. TL1 Editing Data Dictionary for EQPT

MX2800 M13 Multiplexer User Manual Transaction Language 1 (TL1), Section 9
61200290L1-1G 9-27
Table 9-9 contains entries that are used to edit or retrieve options for the equipment portion of the
MX2800. When performing TL1 edit commands from this table, the value of rr should be EQPT, and the
<aid> value should be one of the following:
400 - All EQPT identifiers
401 - Generic
402 - Control Card A
403 - Control Card B
404 - Power Supply A
405 - Power Supply B
LINECDE ENUM One of the following:
•AMI
•B8ZS
•E1AMI
• E1HDB3
•UNAVAIL
Identifies line code for T1/E1s to match
connected devices
• AMI - set T1 to AMI
• B8ZS - Sets T1 to B8ZS
• E1AMI - sets E1 to AMI
• E1HDB3 - sets E1 to HDB3
• UNAVAIL - no T1/E1 available
Table 9-9. TL1 Editing Data Dictionary for EQPT
Keyword Type Domain Description
DIAGBERCLEARCOUNT Y/N Y or [N] Clears BERT count
• Yes (Y) - clears the BERT count
• No (N) - does not clear the BERT count
DIAGBERTCOUNT INT 0, 1, 2, ..., N Error count
DIAGBERTSYNC ENUM One of the following:
•NOSYNC
• SYNC
Identifies state of Pattern Synchronization
• NOSYNC - there is no pattern sync
• SYNC - pattern sync is available
Table 9-8. TL1 Editing Data Dictionary for DS1 (Continued)
Keyword Type Domain Description