MX2800 M13 Multiplexer User Manual Transaction Language 1 (TL1), Section 9
61200290L1-1G 9-25
DSXCFGSTATE ENUM One of the following:
•DISABLE
•ENABLE
•UNAVAIL
•AUTO
Identifies the DSX configuration state
• DISABLE - disables the current
configuration
• ENABLE - enable the newest
configuration
• UNAVAIL - the configuration is
unavailable
• AUTO - the configuration is set to auto
save in nonvolatile memory
DSXCVTHRS ENUM One of the following:
•DISABLE
•1E3
•1E4
•1E5
•1E6
Indicates a limit on the number of code
violations accepted by the unit over a
single T1/E1 before the unit switches
controller cards
• 1E3 - 1 out of every 1,000 bits on a sin-
gle T1/E1 contains a CV
• 1E4 - 1 out of every 10,000 bits on a
single T1/E1 contains a CV
• 1E5 - 1 out of every 100,000 bits on a
single T1/E1 contains a CV
• 1E6 - 1 out of every 1,000,000 bits on a
single T1/E1 contains a CV
DSXLAISRLY Y/N Y or [N] Identifies status of DSX LAIS alarm relay
• Yes (Y) - enables alarm
• No (N) - disables alarm
Table 9-8. TL1 Editing Data Dictionary for DS1 (Continued)
Keyword Type Domain Description
To Next Page
Loading...
