EasyManuals Logo

ADTRAN NetVanta 3000 Series Hardware Installation Guide

ADTRAN NetVanta 3000 Series
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
OVERVIEW NetVanta 3000 Series Hardware Installation Guide
20 Copyright © 2006 ADTRAN, Inc. 61200860L1-34L
NetVanta 3130
The NetVanta 3130 is a single network port multi-service ADSL router targeted at branch office IP routing
applications over ATM. It is a stand-alone unit in a plastic housing and includes an integrated 10/100BaseT 4-
port Ethernet Layer 2 IEEE 802.1q (VLAN) compatible switch with IP router and bridging capabilities. The
unit is powered by a 12 VDC power supply (AC to DC power adapter included). This router uses the most
advanced DSL technology, ADSL2+, to provide more bandwidth and greater reach than ADSL or ADSL2.
This unit also includes an integrated analog modem for dial backup. IPSec VPN support is included without
further software upgrade.
This section includes a list of features, a list of shipping contents, and a description of the unit’s front and
rear panel designs. For additional information, refer to the following sections:
Mounting Options on page 63
Supplying Power to the Unit on page 66
For information on router configuration for a specific application, refer to the quick configuration
documents provided on your ADTRAN OS System Documentation CD. For details on the command line
interface, refer to the AOS Command Reference Guide (also included on your CD).
NetVanta 3130 Features and Specifications
The NetVanta 3130 offers the following features:
Fixed-port Ethernet router with integral 4-port Ethernet switch
IP access router for ADSL, ADSL2, ADSL2+ networks
One ADSL interface supporting ADSL2+ line rates up to 25 Mbps
Supports ATM, PPP over ATM, and PPPoE over ATM
Integrated analog modem for dial backup or remote management
ADTRAN Operating System (AOS) Command Line Interface (CLI)
User-friendly, web-based Graphical User Interface (GUI)
Standards-based eBGP/iBGP, OSPF, RIP, static routing and bridging protocols
Integral stateful inspection firewall protects against Denial of Service (DoS) attacks
Includes IPSec VPN supporting DES/3DES/AES encryption
Compatible with IPSec VPN-equipped devices
Quality of Service (QoS) with low latency queuing (LLQ), weighted fair queuing (WFQ), class-based
weighted fair queuing, and DiffServ marking
Built-in alert and logging mechanisms
Network Address Translation (NAT/NAPT), 1:1 NAT port translation, and NAT Traversal version 2
NAT-compliant SIP ALG
DHCP client, server, and relay
XAUTH including RADIUS, RSA SecurID, and TACACS+
Flash memory supports multiple images of AOS
Remotely configurable and field upgradeable using TFTP or FTP
Telnet, HTTP, SSH, or SNMP management options
1.63-inch H x 9.00-inch W x 6.38-inch D
DC power (12 VDC, 800 mA, 7.5 W)

Table of Contents

Other manuals for ADTRAN NetVanta 3000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADTRAN NetVanta 3000 Series and is the answer not in the manual?

ADTRAN NetVanta 3000 Series Specifications

General IconGeneral
BrandADTRAN
ModelNetVanta 3000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals