• Route power cords so that they will not be walked on, tripped on,
or pinched by items placed upon or against them. Pay particular
attention to the plug, electrical outlet, and the point where the cord
exits the product.
• Do not pull on cords and cables. When unplugging cords or cables,
grasp the corresponding connector.
• This product contains an integral lithium battery for memory back-
up. This battery is non-rechargeable and may only be replaced by
qualified service personnel. This battery contains less than 1 gram
of lithium per unit, but may require certain statements or declara-
tions prior to shipment on aircraft, ship or train.
• Do not install or use this product in any area subject to extreme
short-term temperature variations, or locations that exceed the spec-
ified operating environment temperatures.
• Never use this product in a wet area.
• To avoid injury or fire hazard, do not operate this product in an
explosive atmosphere.
• Do not install or use the product on an unstable, non-level work
surface.
• Do not operate this product with the covers removed or unsecured.
FCC Requirements
• WARNING: Changes or modifications to this unit not expressly
approved by Advanced Instruments could void the user’s authority to
operate the equipment.
• This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate
xiii
Safe Use