Need help?Do you have a question about the Advanced Instruments 4C3 and is the answer not in the manual?
Preparatory steps before instrument setup, including bench space and outlet checks.
Procedures for unpacking the instrument, removing shipping fixtures, and initial setup steps.
Steps to turn on the instrument after installation, including initial display and printing.
Instructions for filling the instrument with heat transfer fluid, including safety precautions.
Overview of the instrument's main components, their locations, and basic functions.
Configuration options for customizing instrument parameters like date, time, and language.
Overview of instrument startup, self-diagnostic tests, and readiness status.
Step-by-step guide for performing sample tests, including calibration verification.
Procedures for running tests with batch or barcode identification enabled.
Explains the importance and measurement of repeatability and accuracy in cryoscopy.
Recommendations for implementing quality control procedures for instrument performance.
Step-by-step guide for calibrating the instrument using the CALIB button.
Instructions for performing calibration using an automatic calibration cassette.
Contact information and procedures for obtaining technical service and support.
Guidelines for daily and as-needed maintenance tasks to ensure instrument performance.
An overview of troubleshooting levels and how to approach instrument problems.
Procedures for replacing common parts like air filters and fuses.
General| Brand | Advanced Instruments |
|---|---|
| Model | 4C3 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
