xiii
Safe Use
• Do not install or use this product in any area subject to extreme
short-term temperature variations, or locations that exceed the speci-
fied operating environment temperatures.
• Never use this product in a wet area.
• To avoid injury or fire hazard, do not operate this product in an
explosive atmosphere.
• Do not install or use the product on an unstable, non-level work sur-
face.
• Do not operate this product with the covers removed or unsecured.
FCC requirements
• WARNING: Changes or modifications to this unit not expressly
approved by Advanced Instruments could void the user’s authority to
operate the equipment.
• NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a res-
idential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
Canadian ICES requirements
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil
numérique
de la classe A est conforme
à
la norme NMB-003 du
Canada.
To Next Page
Loading...
Need help?
General
