Advanced
®
Micro-Osmometer Model 3320 User’s Guide
- Liquid has been spilled into the interior of the product.
- A foreign object has fallen into the product.
- The product has been dropped or damaged by a falling object.
- There are noticeable signs of overheating or a burning odor.
- The product does not operate normally when you follow the oper-
ating procedures.
- The main supply fuse(s) or any internal fuse(s) continually fail.
• A discharge of static electricity from contact with the human body
or other conductor may damage system boards or static sensitive
devices. Never perform internal maintenance without following rec-
ommended static protection procedures.
• The product is equipped with operator accessible fuses. If a fuse
blows, it may be due to a power surge or failure of a component.
Replace the fuse only once. If the fuse blows a second time, it is
probably caused by failure of a component part. If this occurs, refer
service to qualified service personnel. Always replace the fuse with
one of the same rating, voltage, and type. Never replace the fuse
with one of a higher current rating.
• When servicing the product, use only factory-specified parts.
• WARNING: When returning this product for service, or shipping
this product to a second location, remove all hazardous
specimens and decontaminate the product before pack-
aging for shipment. If the product cannot be deconta-
minated, consult with your shipping agent on appropri-
ate packaging and marking.
28
To Next Page
Loading...
Need help?
General
